Reception of indications of counters of hot and cold water supply

How to transfer meter readings for water without unnecessary trouble? There may be several ways, but the choice of a universal one depends on the requirements of housing administration, the order of local authorities. Before sending data, they must be properly fixed.

Taking testimony

With the first experience of taking readings from water meters, it is necessary to understand which one counts hot water and which one counts cold water. As a rule, such counters differ in color. The hot water meter is usually red and the cold water is blue. There are cases when both water meters are exactly the same, then their belonging can be determined as follows:

1. To the touch it will not be difficult to establish where the hot water is, and where it is cold.
2. You can determine the pipe wiring, in most apartments it is standard. Top will be a pipe with hot water, and the bottom - with cold.
3. Another simple way is to turn on the water in the faucet and compare it with which counter starts working.
4. As a rule, cold water is consumed more often, therefore, its meter readings will be more.

As soon as it becomes clear what water is responsible for both counters, you can take readings of metering devices. Each counter has the same principle of operation, it shows 8 digits, 5 of which are black, and the last 3 are red. Black numbers are needed for taking readings, since they show the consumed cubic meters of water, while red ones indicate the displacement. For example, the meter shows the following values: 00007567, where 00007 is black and 567 is red.

In this case, 00007 denotes 7 m³ of consumed water, and since the red numbers 567 exceed the value of 500, they need to be rounded to 1. In this example, it is necessary to add 1 to 00007, then the end result will be 8 m³. They need to make a receipt. It is necessary to record and take readings every month, then it will be clearly visible how much water is consumed.

How to fill out a receipt?

In order for a service employee to be able to correctly receive the readings of the hot and cold water meters, each consumer must correctly fill out a receipt for water in accordance with the specified requirements. To do this, it is necessary to clearly write the current readings in the column with the same name in the monthly receipt sent.

If something is written wrong, water can be calculated according to average standards, and payment will be more expensive. In the GVS column you need to enter the readings of the hot water meters, in the XBC column - the meter readings for cold water.

In the "Wastewater" column fits the amount of spent cubes of hot and cold water.

Acceptance of readings of water metering devices can be made both at the cash desks for receiving payments, and by phone number, where the subscriber needs to call his current account and current readings. You can transfer the data to a special box installed at the entrance, or via SMS to the number indicated in the receipt. Increasingly, active users are using Internet resources to transfer data from meters.

How to transfer data via the Internet?

To make readings of water meters via the Internet, the user does not need to have any special knowledge.

As a rule, the site itself for receiving payments is adapted to any category of the population. The main advantage of this method is convenience, since it is possible to make readings of water meters via the Internet any day, at any time of the day, quickly and without problems. In addition, there are a number of other advantages:

1. You do not have to spend time waiting in line at the cash offices of the settlement centers or trying in vain to get through.
2. There will be no need to receive forms for filling. In addition, you do not have to worry that employees will not understand the handwriting that filled out the form.

As soon as there is another need to enter data on the counters, you will have to go to the site of the city settlement center, and after going through a simple registration procedure, you can proceed directly to entering numbers. You will need to specify the region of their residence, for example, the Moscow region. Then you don’t need to do this: as soon as you need to enter the following readings, the site will automatically display the user in his personal account.

Procedure:

1. You must go to the Internet resource of your HOA or city settlement center, go through the registration procedure. To do this, you will need to enter your data: name, e-mail address, phone number, come up with your own username and password (it is best to write them in a notebook and save). Registration is carried out once, when you re-enter the site, you do not need to go through it again.
2. Then you need to open a personal account on the same site, using the login and password already invented earlier.
3. The next step is to find the section “Form for entering meter readings” and open it. Here, the user will be given a special form to fill out, and it will be necessary to enter the current readings into it. It is important to remember that care here will not hurt, otherwise incorrectly entered numbers may cause difficulties in payment. Still need to take into account the fact that the testimony must be made in time, otherwise the user will have to pay a penalty for their late submission.
4. After the readings are entered in their columns, you should click the "Continue" button.
5. The final step will have to confirm your actions.

All readings should be taken in accordance with the numbers on the counters. If you cheat and enter smaller values ​​in the blanks, then over time the difference in readings will start to grow. In addition, from time to time employees of the water utility go to residential buildings and check all the meters, so there’s no point in deceiving the organization.